Geo Fix Paving Joint Compound – 20kg

nGeo Fix Paving Joint Compound is a unique ready to use self curing jointing material for all types of paving having joints of 5mm and over. GeoF ix Paving Joint Compound is a quick and easy way of applying a permanent rigid joint with no special machinery or equipment required. Geo Fix Paving Joint Compound is suitable for natural stone, concrete, slate, clay, terracotta and granite and can be used in areas subject to light vehicular traffic.nnGeo Fix Original 20kg is available in Grey and Buff.nnn

Benefits

n

n
• Supplied ready to use, no mixing required.
n
• Simply brush into joints and compact.
n
• Cement free – Non staining.
n
• Sets hard, wont crack or wash out.
n
• Resists weeds and plant growth.
n
• Totally weatherproof, unaffected by frost.
n
• For all joints of 5mm wide and over.
n
• Water permeable, allows water to escape.
n

n

Areas For Use

n

n
• Footpaths.
n
• Outdoor patio areas.
n
• Indoor stone floor areas.
n
• Pedestrian areas.
n
• Driveways.
n

n

Limitations

n

n
• Do not use on joints smaller than 5mm.
n
• Read all instructions and leaflet carefully before use.
n
• Joint depth must be a minimum of 25mm
n
• Do not apply to wet areas or when rain is imminent or below 00C
n
• In areas subject to vehicular traffic it is essential that the paving elements are bedded on a class 1 mortar and a high percentage of the mortar is squeezed up the joint, thereby providing support for the paving elements.
n
• GEO-FIX should be considered for its aesthetic and not its structural properties.
n
• The jointing should not be cleaned by use of high pressure washers until cured for 7 days. The distance between nozzles to jointing must be at least 10cm.
n
• Always follow the manufacturer’s instructions carefully. As the company cannot be aware of all the applications and materials the product may be used on, it is the user’s responsibility to determine suitability for use. Please contact technical services for advice or request technical data sheet.
n

n n

Surface Preparation

nEnsure that the paving to be jointed is dry and free from loose dirt, oil, debris and grease etc. it is essential the joint widths are a minimum of 5mm wide with a minimum depth of 25mm. deeper joints can be filled with dry sand or other materials to meet the required minimum depth.nnApplicationnnGeo Fix is supplied ready to use and does not require any further mixing or addition of other materials.nnCarefully open the vacuum packed bag and sprinkle Geo Fix Paving Joint Compound sufficient to cover an area of 4-5m2 (see coverage table below). Using a soft brush, push the Geo Fix Paving Joint Compound into the joints ensuring they are filled with the material.nnProtect treated joints from rain until fully cured. Any contact with rain and water before the compound has set will affect the product.nnTo ensure a perfect joint, press the Geo Fix Paving Joint Compound into the joints with a pointing tool or compact into joints using a vibrating plate. Top up as necessary.nnAny residue left on the surface when cured can be simply cleaned off by sweeping with a stiff brush.n

Coverage

n(The figures given below are approximate quantities required at 25mm depth per 20kg of Geofix)nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn

Joint width	250 x 250mm	450 x 450mm	600 x 600mm
5mm	13.0m2	22.0m2	26.5m2
6mm	11.0m2	19.0m2	22.0m2
7mm	9.0m2	16.5m2	17.5m2
8mm	7.8m2	14.5m2	16.5m2
9mm	6.5m2	12.0m2	14.5m2
10mm	5.8m2	11.0m2	13.0m2

n nnView our full Landscaping Product Range